¥268.00 包邮

超微,X7DCL

超微 X7DCL-3 Intel 5100芯片组工作站主板支持54系列771针至强

24小时发货 积分抵现5%销量：177积分：14

人工质检先行赔付 8天无理由退货

退货送8元补贴券

验货师评语优点Intel5100芯片组,2代ECCREG内存,双口Intel82573V+82573L网卡芯片.支持51/52/53/54全系列771双核四核CPU.3个PCI-E插槽,3个PCI插槽. 标签：超微,X7DCL

超微 X7DCL-3 Intel 5100芯片组工作站主板支持54系列771针至强评价

湖北十堰 ID191947 :
灵芝破壁孢子粉怎么吃灵芝孢子粉有哪些功效和作用
评论时间：2024年05月05日

吉林长春 ID196411 :
灵芝孢子粉的功效氨糖哪种好
评论时间：2024年05月05日

辽宁沈阳 ID672472 :
灵芝孢子粉的正确吃法灵芝孢子粉的副作用及禁忌
评论时间：2024年05月05日

刘记电脑质优价廉

描述相符：4.81 服务态度：4.85 发货速度：4.83

¥268.00
¥268.00
¥70.00
¥290.00
¥50.00
¥150.00
¥208.00
¥198.00
¥50.00
¥660.00

商品销量：177

收藏数量：1784

店铺名称: 刘记电脑质优价廉

旺旺: liustudent

商品永久链接：超微 X7DCL-3 Intel 5100芯片组工作站主板支持54系列771针至强

卖点：Intel5100芯片组,2代ECCREG内存,双口Intel82573V+82573L网卡芯片.支持51/52/53/54全系列771双核四核CPU.3个PCI-E插槽,3个PCI插槽.

标签：超微,X7DCL

图文详情

24小时发货默认发默认物流：中通快递；发圆通快递和邮政小包请联系客服备注和补邮费。。

标全新是为了直通车推广.

实际为原装拆机

实物图片.

9成新以上.

带原装档板

可在我店里选配双核或四核的至强CPU.

4G或8G单条内存.配机有优惠哟.

主板质保一个月.

主板官网地址可联系卖家给链接.

下面是官网描述:

主板具体参数:

DDR2, SAS Quad-Core Xeon 5100
(San Clemete) ServerBoard

Key Features

1. Dual Intel® 64-bit Xeon® Quad-Core or
Dual-Core, with 1333 / 1066 MHz FSB

2. Intel® 5100 (San Clemente) Chipset

3. Up to 48GB 667/533MHZ DDR2 ECC
Register SDRAM *

4. Intel® 82573V and Intel® 82573L
Gigabit Ethernet Controller

5. LSI 1068E 8-Port SAS Controller

6. 6x SATA (3 Gbps) Ports via ICH9R SB
Controller

7. 2 (x8) PCI-E, 1 (x4) PCI-E (in x8 slot),
3x 32-bit PCI slots

8. XGI Z9 Graphics with 32MB
video memory

9. Low Profile IPMI 2.0 (SIMLC) Slot

Product SKUs

MBD-X7DCL-3 -O	X7DCL-3 (Standard Retail Pack)
MBD-X7DCL-3 -B	X7DCL-3 (Bulk Pack)


Physical Stats

Form Factor	ATX
Dimensions	12.05" x 10" (30.6cm x 25.4cm)


Processor/Cache

CPU	Dual 771-pin LGA Sockets Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz Dual-Core Intel® Xeon®Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
System Bus	1333 / 1066 MHz system bus
Operating System Software	Supports 64-bit Operating Systems Supports 32-bit Operating Systems


System Memory

Memory Capacity	Six 240-pin DIMM sockets Supports up to 48GB 667/ 533MHz DDR2 ECC Register Single/Dual Rank memory * Dual channel memory bus Memory must be populated in pairs
Memory Type	667/533MHz Register DDR2 ECC Single/Dual Rank SDRAM 72-bit, 240-pin gold-plated DIMMs *
DIMM Sizes	256MB, 512MB, 1GB, 2GB, 4GB, 8GB**
Memory Voltage	1.8V only
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)


On-Board Devices

Chipset	Intel® 5100 (San Clemente) chipset Intel® ICH9R
SAS	LSI SAS1068E RAID 0, 1, 10 support (Optional: AOC-IButton68) RAID 5 support
SATA	Intel ICH9R SB SATAII Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux)
IPMI	Support for Intelligent Platform Management Interface v.2.0 / 1.5 200-pin IPMI slot (SIMLC) (Optional: AOC-SIMLC) NOTE: KVM-over-LAN supported w/ AOC-SIM1U+ - PCB 1.1A only
Network Controllers	Intel® 82573V & 82573L Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics	XGI Z9 with 32 MB of video memory
Super I/O	Winbond W83627HG-AW chip
Clock Generator	CK505 chip


Input / Output

SAS	8 SAS / SATA ports
Serial ATA	Six Serial ATA ports Six SATA hard drives supported
IDE	Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card Supports UDMA Mode 5, PIO Mode 4, and ATA/100 Compact Flash (40-pin connector, IDE 1, single channel) slot
Floppy	1 Floppy controller; 1.44 MB, 2.88 MB
LAN	2x RJ45 LAN ports
USB	2x USB rear ports 3x USB internal header 5 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA	1x VGA Port
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Port / Header	1 Fast UART 16550 serial port 1 Header


Chassis ( Optimized for X7DCL-3 )

1U Chassis	CSE-813MTQ-520C CSE-813MTQ-280C CSE-813MT-420C CSE-813MT-410C
2U Chassis	CSE-823TQ-550LP CSE-823T-550LP CSE-823MTQ-R700LP CSE-825TQ-560LP CSE-825MTQ-R700LP
Mid Tower	CSE-733TQ-645 CSE-733TQ-465
Tower / 4U Rackmount	CSE-743T-645
Important Chassis Notes	To ensure system stability, a 500W (minimum) ATX power supply [8-pin (+12V) and 24-pin are required]


Expansion Slots

PCI-Express	2 (x8) PCI-e slots 1 (x4) PCI-e (using x8) slot
PCI	3x 32-bit PCI slots


System BIOS

BIOS Type	8Mb Flash EEPROM with Phoenix ® BIOS
BIOS Features	Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0/2.0/3.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.5


Management

Software	Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 SuperDoctor® III Watch Dog NMI
Power Configurations	ACPI Power Management Main Switch Override Mechansim Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Power-on mode for AC power recovery Internal/External modem remote ring-on


PC Health Monitoring

Voltage	Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of six 4-pin fans 6x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Support for 3-pins (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 6x Fan Connectors PSU I²C temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED Suspend-state Indicator LED
Other Features	Chassis intrusion detection Chassis intrusion header Chipkill Support


Operating Environment / Compliance

RoHS	RoHS Compliant 6/6, Pb Free
Environmental Spec.	Operating Temperature: 10° to 35°C (50° to 95°F) Non-operating Temperature: -40° to 70°C (-40° to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)